Edge Network Computing

5G peripheral device for corporate routers

Compatible 5G enabler for routers with no built-in wireless support

Product Highlights

  • Non-intrusive and compatible with other routers
  • Easy and quick installation
  • You can place the device anywhere in the office
  • You only need an Ethernet connection
  • PoE+ support
  • Standards-based
  • No management required

Introduction

5G Mobile connections are an ideal backup infrastructure for fixed WAN services. Unfortunately, however, corporate routers are not usually equipped to handle them, or are installed in poorly accessible locations and hence coverage is poor. Teldat-5Ge is the solution to this problem because it connects the corporate router to mobile networks easily, economically and non-intrusively. 


Teldat-5Ge integrates 5G mobile connectivity and can be installed wherever there is adequate network coverage, using Ethernet high speed port to connect to the corporate router. 

Competitive Advantages

Quick and easy installation

No configuration required, just connect to Ethernet and it´s ready to go. If PoE+ is enabled, you only need the Ethernet cable; if not, you'll need to plug it.

No management required

The device uses auto provisioning to download the configuration (similar to an IP phone) from the office router.

The corporate router maintains control

The router controls the mobile connection, applying the same connection, security and QoS policies used for the fixed connection.

Designed for 5G service providers

The 5Ge, unlike other devices, is capable of meeting all the EN-DC band combinations and DSS requirements that 5G-NSA networks usually need.

Description

Teldat-5Ge is the fastest, most effective and versatile solution for the new 5G mobile connectivity.


Mobile networks are unquestionably the ideal backup connectivity solution where wired networks are unavailable. However, corporate routers are not usually prepared to handle a wireless connection or are housed in locations where mobile network coverage is lousy. Teldat-5Ge provides the solution to these problems. The compact design of the device makes it ideal for placing inside the office for optimum coverage and it connects to the corporate router via Ethernet.


The existing corporate router directly controls the mobile connection and integrates it with security, QoS and network management policies (Teldat-5Ge can operate as a standalone device).


With automatic provisioning and Power over Ethernet support, Teldat-5Ge can be efficiently and securely installed in just a few minutes, without requiring qualified personnel.


 

borrar

 


Ensuring connectivity for a corporation's office is essential. While redundant copper or fiber connections are useful, different fixed access methods often share the same infrastructure which means there is a chance they might fail at the same time. By contrast, mobile networks use air as a medium and a different infrastructure to fixed networks. This, together with the high level of efficiency of 5G networks in terms of latency and speed, make them the ideal backup system or even as the main connection for offices.


Teldat-5Ge is a 5G device that provides a non-intrusive way to enable mobile access in corporate routers that do not natively support mobile connections or that are installed in communications cabinets with poor coverage. Teldat-5Ge is a peripheral device that works with the router to secure and maintain control over the communications. It can also operate as a standalone device.

Key Features

It Integrates 5G access into existing infrastructure

The router that manages the fixed connections also controls the mobile connections and therefore enforces the same security and QoS policies.

Automatic provisioning

Teldat-5Ge does not store the configuration but it receives it via DHCP during startup. This means that you do not need to do anything on the device before physically installing it.

Installation using a single cable

With Power over Ethernet+ support (a PoE+ injector is available for non-PoE+ switches) it can be powered simply using a single Ethernet cable making installation quick and easy.

Specifically designed to be placed inside the office

The device goes unnoticed in work/transit areas thanks to its compact size and elegant design.

Standards-based

The setup process implies standard features. A VLAN is used to set up the data connection between the router and the Teldat-5Ge, creating what is, for all intents and purposes, a virtual interface on the router.

No management required

The device can be managed from the existing router, so you do not need to reserve an address for managing the device or register it on the management systems.

Tabletop to wall installation

Designed to be mounted on a wall to get the best signal strength.

Standalone router option

In "router mode" the Teldat-5Ge is a standalone solution that provides copper and 5G WAN connectivity to remote offices.

Do you want to know more?

Download the product datasheet in PDF format. Always have access to the product characteristics, whether you are online or not. All the information stored in an easy to read 4-page format.

5G Network Resilience

Teldat provides the ultimate solution to provide automatic 5G WA.

Read our latest Blog Posts

Latest Advances of 5G Plus

Latest Advances of 5G Plus

After years of ongoing discussions about 5G, and even some early talk about 6G in certain circles, this year has introduced a new buzzword: 5G Plus. As we enter the post-summer season and witness more carriers announcing their offerings on this cutting-edge network,...

read more
The benefits of wireless connectivity

The benefits of wireless connectivity

The emergence of compact wireless routers promises to optimize the deployment of distributed locations for different sorts of businesses. As a result of developments in wireless technology, two widely used concepts appeared in the telecommunications sector related to...

read more